Beginning to Build an Aquaponic System

After a few weeks of careful planning, I have finally managed to pool together the resources needed to build my aquaponics system. Some changes were made to the design in order to maximize the amount of space I have available. The major change will be extending the length of the tubing so the system is an entire ten feet long.

Another change being made will be the use of free standing support structures to hold up the tubing. This decision was made to be able to hold the 10 foot pipes up in a sturdy fashion. Another adjustment I made was using caps at the end of the tubing, sealed with a hose clamp. This will allow me to more easily adjust the height of the water inside the tube, which will be very important because I do not intend to flood the plants.

One note about the supports holding the tubes: These were a little tricky because we want the tubes to be slanted slightly downwards so the water moves down the system like a stepping down a stair. So on the right hand side, the highest tube will be 6 ft in the air, the middle 4.5 ft, and the lowest, 3 ft. This must be taken into account by making the support at the opposite end of the tubing hold the pipe at 5'11", the middle tube at 4'7", and the bottom tube at 2'11".

Now that I have explained some changes in the system design, here are some photos of the building process:

Cutting the Wood for the Supports

Drilling together the support for the tubes. 

All of our supplies sitting in one place. 

Aquaponics System Blueprints!

Hi and welcome to my blog. Since this is my third post, I will fill you in on some information about this project. I am designing and building a  hydroponic system for my school. The food grown cannot be used in the school cafeteria. I have decided to donate the majority of the produce grown.

I have developed a design for the system, and need some feedback. I am looking for ways which I can improve the way the system works, if the design is feasible, and if it is not, what can I change to make it work. 3 inch pvc piping would be used (the sheet says 4 in.)  and I would cut 2 inch holes into the pipe to place the netted cups into. The water would be pumped from the reservoir to the upmost pipe on the right hand side. The water would be pulled down the pipes by gravity and empty into the reservoir on the left hand side of the system.

I would appreciate any feedback. Thanks!

Ideas for the Growing System

Hi there! Today I would like to share some of the ideas involving the growing system I am going to set up in my school. First, the produce grown would be sold to the cafeteria. The money would be put back into the system to make improvements. Second, I plan on the system to be Aquaponic based, using fish waste as the source nutrients. The only problem is that I am not sure what to do with the fish once they die. Can they be harvested before they die, depending on the fish used? If you have any experience with this in a school or non-school environment, I would appreciate your ideas.

Modern Agriculture: An Introduction

Hello, my name is Matt and on this blog, I am going to share with you my experience starting an indoor growing system at my school. To provide some context, I am a junior in high school and have been interested in hydroponics for several years now. My passion started during the summer going into seventh grade. I wanted to have the best science fair project that year. I did a ten week experiment testing the growth of peppers being grown in a hydroponic system as opposed to being grown in soil. I did well in the science fair, however, my eighth grade project titled "Parabolic Reflection" won multiple awards. Since then, I have monitored my own hydroponic system in my basement. Now, I have the opportunity to start a hydroponic system in my school. I feel the need to share my experience with others who might want to do something very similar in their school.